For heavy-duty vehicles The D250TS is a fast, fully automatic 4-stage DC/DC battery charger with disconnect function for vehicles with dual 24 V battery banks. The D250TS is ideal for buses, commercial vehicles, motorhomes and boats. It delivers 10 A for 24 V batteries between 28 Ah and 200 Ah and has a 12 V output for supplying the starter battery and connected 12 V consumers. The D250TS complies with protection class IP65 for outdoor use and is suitable for all types of lead-acid batteries, including maintenance-free, liquid, EFB, Ca/Ca, AGM and gel batteries. With the D250TS, you can rest assured that your batteries will always receive the optimum charging voltage. Features Quick installation at lower cost Automatically adapts to any connected power source Automatic battery equalization of 24 V systems Input voltage: 14-30 V DC Output: 28.8 V/10 A, 14.4 V/10 A

CTEK MXT 14 battery charger The MXT 14 is a 24V charger that has been developed for high-performance vehicles such as trucks, buses and commercial vehicle workshops. As a fully automatic 8-stage charger with a charging current of 14A, it is suitable for 24V batteries from 28-300Ah as well as for maintenance charging of up to 500Ah. The MXT 14 is also suitable for outdoor use (protection class IP44). RECOND: Special mode in which deeply discharged batteries are revived and restored to full capacitySUPPLY: Special mode in which the device can be used as a power supply unit for the equipment when the battery is removed (radio code)

PACO MEC1207 7A/12V battery charger

Fully automatic and processor-controlled 8-stage charger for 12V lithium batteries

Ctek MXTS70, the ultimate charger for professionals! The MXTS 70 is a fully automatic 8-stage charger with a selectable charging current between 70 A/12 V and 35 A/24 V for 12 V batteries from 50 to 1000 Ah and 24 V batteries from 25 to 500 Ah. It is equipped with a high-strength aluminum housing for difficult working environments and protects vehicle electronics systems. It is protected against sparks, reverse polarity and short circuits and is equipped with all the features and functions required for professional battery care. Features: Supply mode (power supply function) Regeneration mode Temperature compensated Electronics safe Pulse charge retention Control panel with LED displays Selectable voltage range and amperage Display Detachable cable with heavy-duty clamps Cable length/Ø: approx. 5 m / 16 mm² Temperature compensated Fully automatic charging cycle with adjustable parameters.

PACO MEC2410 10A/24V battery charger

PACO MEC1215 15A/12V battery charger

Fully automatic and processor-controlled 8-stage charger for 12V lithium batteries

PACO MEC1220 20A/12V battery charger

Fully automatic and processor-controlled 8-stage charger for 12V lithium batteries

PACO MEC1212 12A/12V battery charger

Fully automatic 7-stage charger with processor-controlled IUoU characteristic curve for 12V batteries With the microprocessor-controlled Paco MBC charger, charging takes place automatically and protects the battery from harmful overcharging, so the charger can also be used as a trickle charger. The 7-stage charging process is a very comprehensive and accurate charging method that significantly extends battery life and improves battery performance data. The charger is suitable for most lead-acid battery types including calcium, gel and AGM batteries. In addition, the charger has a "reconditioning function", which makes so-called deeply discharged batteries fit for everyday use again by eliminating acid stratification and sulphation. Technical features of the charger: The charger has all modern functions such as: Soft start overvoltage protection Reconditioning Suitable for calcium, wet, AGM, fleece, VRLA and gel batteries Integrated automatically controlled fans Minimum starting voltage of only 2V Reverse polarity protection Overload protection Overheating protection Efficiency >85% The 7 stages at a glance: DESULPHATION (desulphation): Gently increasing and decreasing voltages and currents at the beginning of the charging process eliminate battery sulphation caused by short-distance driving and frequently discharged batteries. SOFTSTART (soft start): Regulated gently increasing voltages ensure a gentle transition and start to the main charge and prevent damage to the lead grids. BULK (main charge): The battery is charged at a steady current and carefully increasing voltage up to a predefined maximum voltage value until 80% of the total charge has been reached. ABSORPTION (residual charge): The battery is fully charged to 100% of the total charge by maintaining a constant voltage and gradually decreasing currents. The gradually decreasing current ensures that the terminal voltage does not become too high during full charging. BATTERY TEST: The battery is tested for self-discharge for 90 seconds. If the absorption phase has not been able to fully charge the battery and the voltage drop is therefore too high, which is the case with old batteries or batteries with strong acid stratification, for example, the system automatically switches to reconditioning mode RECONDITION (reconditioning): This mode starts with very low currents but high voltages of up to 16V, which remedies the acid stratification in deeply discharged batteries. This mode is limited to a maximum of 4 hours and improves the service life and performance of the battery. FLOAT/MAINTENANCE (charge retention/maintenance charge): The battery is evenly maintained at 13.8V "float" voltage without overcharging the battery or harming you. This means that the charger can also remain connected all year round (e.g. for seasonal vehicles/oldtimers) The voltage in this mode is permanently monitored. As soon as the voltage of the battery falls to a predefined level, the battery is recharged to 100% by a pulse charge and thus constantly kept between 95% and 100% state of charge. This cycle is repeated automatically and thus has a positive effect on the battery's service life. High-quality and durable workmanshipWith the Paco MBC charger, particular attention has been paid to a functional and durable external and internal design. For example, the housing is made of high-strength aluminum and is therefore robust and resistant to external influences, while the LED panel on the side of the device means you can always see which mode the charger is currently in.The solid battery terminals and plugs, which have a sufficient cable cross-section, are also of very good and durable quality.Scope of delivery: Paco MBC charger Detailed instructions for use, version: German/English

Charging station with 12 V and 24 V for the workshop and saloon The MXTS 40 has both a 12 V/40 A output and a 24 V/20 A output and offers an adjustable constant voltage to prevent damage to the control unit due to voltage fluctuations during programming. In addition to the progress indicator for the 8-stage charging process, the MXTS 40 also has an easy-to-read OLED display that shows you important charging parameters such as amperage, voltage and recharged capacity. It has a recond mode for reconditioning deeply discharged batteries and a temperature sensor to optimize the charging process in all weather conditions. The MXTS 40 is designed to protect vehicle electronics and has a durable polycarbonate housing for harsh environments. The unit can be combined with the optional WALL HANGER PRO and TROLLEY PRO for secure storage and maximum portability. Features electronically safe, multi-stage fast charging process Outputs: 12 V/40 A and 24 V/20 A IP20 protection class non-sparking reverse polarity protected short-circuit proof

Fully automatic and processor-controlled 8-stage charger for 12V lithium batteries

The M15 is the perfect 15 A battery charger for all boat owners. It has a variety of functions, including a Recond mode for reconditioning deeply discharged liquid and Ca/Ca batteries, as well as a temperature sensor to optimize charging at temperatures other than +25 ºC. It also has a lithium* mode for lithium* batteries. The M15 is supplied with a long 4 m cable with M10 ring terminals to facilitate boat installation. *) 12 V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Functions Fully automatic and easy to operate Easy to connect, spark-protected and reverse polarity protected Compact, robust design IP44 protection rating for outdoor use

PACO MEC1205 5A/12V battery charger

For 24 V batteries with power supply The MXT 4.0 is a cost-effective 8-stage charger with a charging current of 4 A for 24 V batteries between 8 Ah and 100 Ah and for trickle charging batteries up to 250 Ah. It can also be used for backup systems, snow groomers, industrial cleaning machines and wheelchairs. The functions of the MXT 4.0 include battery diagnostics, which determine whether the battery can accept and hold a charge, a recond mode for reconditioning deeply discharged batteries in which acid layers have formed, an optimized cold charging mode and an AGM mode. In supply mode, the device can be used as a power supply source. Functions Fully automatic, 8-stage "connect and forget" charging process Can be used as a power supply Easy to read LED display non-sparking reverse polarity protected short-circuit proof 2-year guarantee

Fully automatic 7-stage charger with processor-controlled IUoU characteristic curve for 24V batteries With the microprocessor-controlled Paco MBC charger, charging takes place automatically and protects the battery from harmful overcharging, so the charger can also be used as a trickle charger. The 7-stage charging process is a very comprehensive and accurate charging method that significantly extends battery life and improves battery performance data. The charger is suitable for most lead-acid battery types including calcium, gel and AGM batteries. In addition, the charger has a "reconditioning function", which makes so-called deeply discharged batteries fit for everyday use again by eliminating acid stratification and sulphation. Technical features of the charger: The charger has all modern functions such as: Soft start overvoltage protection Reconditioning Suitable for calcium, wet, AGM, fleece, VRLA and gel batteries Integrated automatically controlled fans Minimum starting voltage of only 2V Reverse polarity protection Overload protection Overheating protection Efficiency >85% The 7 stages at a glance: DESULPHATION (desulphation): Gently increasing and decreasing voltages and currents at the beginning of the charging process eliminate battery sulphation caused by short-distance driving and frequently discharged batteries. SOFTSTART (soft start): Regulated gently increasing voltages ensure a gentle transition and start to the main charge and prevent damage to the lead grids. BULK (main charge): The battery is charged at a steady current and carefully increasing voltage up to a predefined maximum voltage value until 80% of the total charge has been reached. ABSORPTION (residual charge): The battery is fully charged to 100% of the total charge by maintaining a constant voltage and gradually decreasing currents. The gradually decreasing current ensures that the terminal voltage does not become too high during full charging. BATTERY TEST: The battery is tested for self-discharge for 90 seconds. If the absorption phase has not been able to fully charge the battery and the voltage drop is therefore too high, which is the case with old batteries or batteries with strong acid stratification, for example, the system automatically switches to reconditioning mode RECONDITION (reconditioning): This mode starts with very low currents but high voltages of up to 32V, which remedies the acid stratification in deeply discharged batteries. This mode is limited to a maximum of 4 hours and improves battery life and performance. FLOAT/MAINTENANCE (charge retention/maintenance charge): The battery is evenly maintained at 27.6V "float" voltage without overcharging the battery or harming you. This means that the charger can also remain connected all year round (e.g. for seasonal vehicles/oldtimers) The voltage in this mode is permanently monitored. As soon as the voltage of the battery falls to a predefined level, the battery is recharged to 100% by a pulse charge and thus constantly kept between 95% and 100% state of charge. This cycle is repeated automatically and thus has a positive effect on the battery's service life. High-quality and durable workmanshipWith the Paco MBC charger, particular attention has been paid to a functional and durable external and internal design. For example, the housing is made of high-strength aluminum and is therefore robust and resistant to external influences, while the LED panel on the side of the device means you can always see which mode the charger is currently in.The solid battery terminals and plugs, which have a sufficient cable cross-section, are also of very good and durable quality.Scope of delivery: Paco MBC charger Detailed instructions for use, version: German/English

Multifunctional portable charger and intelligent maintenance device with Adaptive Boost technology CS FREE means freedom. The freedom to charge 12 V lead-acid and lithium-ion batteries anywhere. Even without mains power. As a portable charger, it recharges batteries with mains power - or with the power supplied by solar panel kits or secondary batteries. The CS FREE's revolutionary Adaptive Boost technology automatically analyzes the condition of the battery when the vehicle fails to start after simply plugging it in. It then determines the safest and quickest way to supply the battery with the energy required for a successful vehicle start within 15 minutes. In contrast to most so-called boosters, the CS FREE takes a differentiated and safe approach. The battery and the vehicle's electronics are therefore not damaged by indiscriminate charging. The CS FREE is also an intelligent maintenance device and a high-tech power bank that keeps the battery and electronics ready for use at all times. FunctionsCan be used for all 12 V lead-acid and lithium-ion batteriesSuitable for batteries in motorcycles, cars, leisure vehicles and motorhomesCountdown function with display of remaining charging timeCan safely remain permanently connected for intelligent maintenance chargingCan be charged and used with 12 V accessory socket, secondary battery or solar panelUSB-C and USB-A type outputs for charging devices such as laptops, smartphones and tabletsEasy to understand, easy to useNo mode selection - simply connect, because the CS FREE does the restComplete range of accessories for charging without mains power and practical storageNew ergonomic design with robust and durable housing.Easy to transport or mount on the wall with the optional CS Wall Mount

PACO MEC1210 10A/12V battery charger

With the PRO25S from CTEK, you are choosing a professional, highly efficient and versatile 25 A charger and power supply unit. The battery charger is suitable for all 12-volt vehicle batteries, including modern lithium-ion batteries (LiFePO4). Countless workshops, car dealerships and private vehicle owners trust this innovative and sophisticated charger to charge each battery according to their individual requirements. Charge your battery intelligently and safely. The CTEK PRO25S has a low voltage and current ripple and is therefore ideally suited for safe use with sensitive vehicle electronics. The charger works fully automatically, is easy to operate and connect and is spark-protected and reverse polarity protected to protect the user and the battery from damage. The CTEK PRO25S stands for reliability in daily use that you can rely on. In professional use. Day after day. Around a quarter of all vehicles are brought into the workshop with an undercharged battery. This is why premature battery failure during maintenance or repair is a common occurrence. This is neither productive nor profitable for the workshop. The PRO25 charges, overhauls and restores 12-volt batteries of all types. And it does so quickly, safely and without disrupting the maintenance or repair process. The device is also the perfect power source for diagnostics and troubleshooting and protects important configuration data if the battery has to be disconnected from the vehicle. In the car showroom, the PRO25 is a powerful yet lightweight and portable solution for battery backup. It is safe and easy to use and quiet enough to be placed under the vehicle. Compatible with any 12-volt battery technology. Wet batteries Ca/Ca batteries (calcium) Gel batteries AGM and EFB batteries Lithium-ion batteries (LiFePO4) The CTEK PRO25S covers a capacity range from 40 Ah to 500 Ah (LiFePO4: 30 Ah to 450 Ah).

Fully automatic 7-stage charger with processor-controlled IUoU characteristic curve for 24V batteries With the microprocessor-controlled Paco MBC charger, charging takes place automatically and protects the battery from harmful overcharging, so the charger can also be used as a trickle charger. The 7-stage charging process is a very comprehensive and accurate charging method that significantly extends battery life and improves battery performance data. The charger is suitable for most lead-acid battery types including calcium, gel and AGM batteries. In addition, the charger has a "reconditioning function", which makes so-called deeply discharged batteries fit for everyday use again by eliminating acid stratification and sulphation. Technical features of the charger: The charger has all modern functions such as: Soft start overvoltage protection Reconditioning Suitable for calcium, wet, AGM, fleece, VRLA and gel batteries Integrated automatically controlled fans Minimum starting voltage of only 2V Reverse polarity protection Overload protection Overheating protection Efficiency >85% The 7 stages at a glance: DESULPHATION (desulphation): Gently increasing and decreasing voltages and currents at the beginning of the charging process eliminate battery sulphation caused by short-distance driving and frequently discharged batteries. SOFTSTART (soft start): Regulated gently increasing voltages ensure a gentle transition and start to the main charge and prevent damage to the lead grids. BULK (main charge): The battery is charged at a steady current and carefully increasing voltage up to a predefined maximum voltage value until 80% of the total charge has been reached. ABSORPTION (residual charge): The battery is fully charged to 100% of the total charge by maintaining a constant voltage and gradually decreasing currents. The gradually decreasing current ensures that the terminal voltage does not become too high during full charging. BATTERY TEST: The battery is tested for self-discharge for 90 seconds. If the absorption phase has not been able to fully charge the battery and the voltage drop is therefore too high, which is the case with old batteries or batteries with strong acid stratification, for example, the system automatically switches to reconditioning mode RECONDITION (reconditioning): This mode starts with very low currents but high voltages of up to 32V, which remedies the acid stratification in deeply discharged batteries. This mode is limited to a maximum of 4 hours and improves battery life and performance. FLOAT/MAINTENANCE (charge retention/maintenance charge): The battery is evenly maintained at 27.6V "float" voltage without overcharging the battery or damaging you. This means that the charger can also remain connected all year round (e.g. for seasonal vehicles/oldtimers) The voltage in this mode is permanently monitored. As soon as the battery voltage falls to a predefined level, the battery is recharged to 100% by a pulse charge and thus constantly maintained between 95% and 100% state of charge. This cycle is repeated automatically and thus has a positive effect on the battery's service life. High-quality and durable workmanshipWith the Paco MBC charger, particular attention has been paid to a functional and durable external and internal design. For example, the housing is made of high-strength aluminum and is therefore robust and resistant to external influences, while the LED panel on the side of the device means you can always see which mode the charger is currently in.The solid battery terminals and plugs, which have a sufficient cable cross-section, are also of very good and durable quality.Scope of delivery: Paco MBC charger Detailed instructions for use, version: German/English

PACO MEC1225L 25A/12V Wet, AGM, Gel & LiFePO4 battery charger Microprocessor control (CPU)This is an automatic battery charger with full power factor correction (PFC) and 8 charging stages.Automatic charging protects your battery from overcharging. This means you can leave the charger connected to the battery for an unlimited period of time.The 8-stage charging is a very comprehensive and accurate charging process that gives your battery a longer life and better performance compared to conventional chargers.8-stage chargers are suitable for most battery types, including LITHIUM, GEL, AGM, WET, MF and CALCIUM batteries. They can also help restore discharged and sulphated batteries.The lithium battery mode includes 8 stages: Soft Start, Bulk, Absorption, Analysis, Completion, Maximization, Float and Maintain.The lead-acid battery mode consists of 8 stages: Desulfation, Soft Start, Bulk, Absorption, Analysis,Recondition,Float and Pulse.

With the PRO25SE from CTEK, you are choosing a professional, highly efficient and versatile 25 A charger and power supply unit. The battery charger is suitable for all 12-volt vehicle batteries, including modern lithium-ion batteries (LiFePO4). Countless workshops, car dealerships and private vehicle owners trust this innovative and sophisticated charger to charge every battery according to their individual requirements. The CTEK PRO25SE is the perfect choice for batteries that need to be charged quickly or monitored continuously. This PRO25SE differs from the PRO25S in that it has 6 meter long charging cables and is supplied including the wall bracket 300. Charge your battery intelligently and safely. The CTEK PRO25SE has a low voltage and current ripple and is therefore ideally suited for safe use with sensitive vehicle electronics. The charger works fully automatically, is easy to operate and connect and is spark-protected and reverse polarity protected to protect the user and the battery from damage. The CTEK PRO25SE stands for reliability in daily use that you can rely on. In professional use. Day after day. Around a quarter of all vehicles are brought into the workshop with an undercharged battery. This is why premature battery failure during maintenance or repair is a common occurrence. This is neither productive nor profitable for the workshop. The PRO25 charges, overhauls and restores 12-volt batteries of all types. And it does so quickly, safely and without disrupting the maintenance or repair process. The device is also the perfect power source for diagnostics and troubleshooting and protects important configuration data if the battery has to be disconnected from the vehicle. In the car showroom, the PRO25 is a powerful yet lightweight and portable solution for battery backup. It is safe and easy to use and quiet enough to be placed under the vehicle. Compatible with any 12-volt battery technology. Wet batteries Ca/Ca batteries (calcium) Gel batteries AGM and EFB batteries Lithium-ion batteries (LiFePO4) The CTEK PRO25SE covers a capacity range from 40 Ah to 500 Ah (LiFePO4: 30 Ah to 450 Ah).