Charging batteries for cars and vans in the professional workshop The MXS 10EC is a fully automatic, intelligent 8-stage charger designed for professional use. This makes it perfect for workshops. It charges 12 V batteries (including AGM) between 20 Ah and 200 Ah with up to 10 A and provides trickle charging for batteries up to 300 Ah. The MXS 10EC has a wide range of functions, including battery diagnostics to determine whether the battery can accept and hold a charge, a recond mode for reconditioning deeply discharged batteries in which acid layers have formed, and a temperature sensor to optimize the charging process in cold environments. In addition, the device can be used as a power supply source. The MXS 10EC is easy to transport and is supplied with a robust bumper made of protective silicone rubber and a 4 m extension cable. Functions Fully automatic, 8-stage "connect and forget" charging process Charging of batteries up to 300 Ah Easy-to-read LED display splash-proof and dust-proof (IP65) non-sparking reverse polarity protected short-circuit proof

Charging station with 12 V and 24 V for the workshop and saloon The MXTS 40 has both a 12 V/40 A output and a 24 V/20 A output and offers an adjustable constant voltage to prevent damage to the control unit due to voltage fluctuations during programming. In addition to the progress indicator for the 8-stage charging process, the MXTS 40 also has an easy-to-read OLED display that shows you important charging parameters such as amperage, voltage and recharged capacity. It has a recond mode for reconditioning deeply discharged batteries and a temperature sensor to optimize the charging process in all weather conditions. The MXTS 40 is designed to protect vehicle electronics and has a durable polycarbonate housing for harsh environments. The unit can be combined with the optional WALL HANGER PRO and TROLLEY PRO for secure storage and maximum portability. Features electronically safe, multi-stage fast charging process Outputs: 12 V/40 A and 24 V/20 A IP20 protection class non-sparking reverse polarity protected short-circuit proof

Ctek MXTS70, the ultimate charger for professionals! The MXTS 70 is a fully automatic 8-stage charger with a selectable charging current between 70 A/12 V and 35 A/24 V for 12 V batteries from 50 to 1000 Ah and 24 V batteries from 25 to 500 Ah. It is equipped with a high-strength aluminum housing for difficult working environments and protects vehicle electronics systems. It is protected against sparks, reverse polarity and short circuits and is equipped with all the features and functions required for professional battery care. Features: Supply mode (power supply function) Regeneration mode Temperature compensated Electronics safe Pulse charge retention Control panel with LED displays Selectable voltage range and amperage Display Detachable cable with heavy-duty clamps Cable length/Ø: approx. 5 m / 16 mm² Temperature compensated Fully automatic charging cycle with adjustable parameters.

With the PRO25S from CTEK, you are choosing a professional, highly efficient and versatile 25 A charger and power supply unit. The battery charger is suitable for all 12-volt vehicle batteries, including modern lithium-ion batteries (LiFePO4). Countless workshops, car dealerships and private vehicle owners trust this innovative and sophisticated charger to charge each battery according to their individual requirements. Charge your battery intelligently and safely. The CTEK PRO25S has a low voltage and current ripple and is therefore ideally suited for safe use with sensitive vehicle electronics. The charger works fully automatically, is easy to operate and connect and is spark-protected and reverse polarity protected to protect the user and the battery from damage. The CTEK PRO25S stands for reliability in daily use that you can rely on. In professional use. Day after day. Around a quarter of all vehicles are brought into the workshop with an undercharged battery. This is why premature battery failure during maintenance or repair is a common occurrence. This is neither productive nor profitable for the workshop. The PRO25 charges, overhauls and restores 12-volt batteries of all types. And it does so quickly, safely and without disrupting the maintenance or repair process. The device is also the perfect power source for diagnostics and troubleshooting and protects important configuration data if the battery has to be disconnected from the vehicle. In the car showroom, the PRO25 is a powerful yet lightweight and portable solution for battery backup. It is safe and easy to use and quiet enough to be placed under the vehicle. Compatible with any 12-volt battery technology. Wet batteries Ca/Ca batteries (calcium) Gel batteries AGM and EFB batteries Lithium-ion batteries (LiFePO4) The CTEK PRO25S covers a capacity range from 40 Ah to 500 Ah (LiFePO4: 30 Ah to 450 Ah).

With the PRO25SE from CTEK, you are choosing a professional, highly efficient and versatile 25 A charger and power supply unit. The battery charger is suitable for all 12-volt vehicle batteries, including modern lithium-ion batteries (LiFePO4). Countless workshops, car dealerships and private vehicle owners trust this innovative and sophisticated charger to charge every battery according to their individual requirements. The CTEK PRO25SE is the perfect choice for batteries that need to be charged quickly or monitored continuously. This PRO25SE differs from the PRO25S in that it has 6 meter long charging cables and is supplied including the wall bracket 300. Charge your battery intelligently and safely. The CTEK PRO25SE has a low voltage and current ripple and is therefore ideally suited for safe use with sensitive vehicle electronics. The charger works fully automatically, is easy to operate and connect and is spark-protected and reverse polarity protected to protect the user and the battery from damage. The CTEK PRO25SE stands for reliability in daily use that you can rely on. In professional use. Day after day. Around a quarter of all vehicles are brought into the workshop with an undercharged battery. This is why premature battery failure during maintenance or repair is a common occurrence. This is neither productive nor profitable for the workshop. The PRO25 charges, overhauls and restores 12-volt batteries of all types. And it does so quickly, safely and without disrupting the maintenance or repair process. The device is also the perfect power source for diagnostics and troubleshooting and protects important configuration data if the battery has to be disconnected from the vehicle. In the car showroom, the PRO25 is a powerful yet lightweight and portable solution for battery backup. It is safe and easy to use and quiet enough to be placed under the vehicle. Compatible with any 12-volt battery technology. Wet batteries Ca/Ca batteries (calcium) Gel batteries AGM and EFB batteries Lithium-ion batteries (LiFePO4) The CTEK PRO25SE covers a capacity range from 40 Ah to 500 Ah (LiFePO4: 30 Ah to 450 Ah).

Profile charger with 60 A and variable output, also for 12 V LiFePO₄ The CTEK PRO60 restores the charging capacity and reconditions batteries using a patented multi-stage charging process. It is compatible with all types of 12 V batteries, including normal liquid acid, Ca/Ca and lithium (LiFePO4) as well as AGM and EFB start/stop batteries. The PRO60's adaptive charging mode automatically detects the battery characteristics and selects the optimum settings for the fastest possible charge. The device is designed to be extremely user-friendly with just four buttons and a clear, easy-to-read LCD display. The Pro60 is also the perfect stable power supply. The output voltage is adjustable between 12.6 V and 14.8 V in steps of 0.1 V. This ensures that no damage occurs to the sensitive vehicle electronics. Functions easy to operate with clear LCD display unique, patented, adaptive charging mode for automatic detection of battery size two power supply modes for diagnostic purposes and for showrooms integrated temperature compensation robust, impact-resistant polycarbonate housing 5 m long cable and high-performance terminals protection class IP40 (for indoor use) non-sparking reverse polarity protected short-circuit proof