Sikaflex® 554 - 300 ml cartridge in white Sikaflex®-554 is an elastic one-component STP adhesive system specially developed for bonding large components in industrial production. Sikaflex®-554 shows good adhesion to a wide range of substrates with minimal pre-treatment. Sikaflex®-554 can be accelerated with the Booster and PowerCure system.Product features / advantages Very good weather resistance Good resistance to mold and mildew Good adhesion to a wide range of substrates without primer Good color stability under UV influence Free from solvents, isocyanate, phthalate and PVC High dynamic load-bearing capacity ISEGA certificate for use in the food sector Sikaflex®-554 is suitable for joints that are exposed to dynamic loads. Suitable substrates are metals, especially aluminum, metal primers, paints, sheet steel, ceramic materials and plastics. Sikaflex®-554 shows good adhesion to a variety of substrates with minimal pre-treatment. Follow the manufacturer's recommendations before using Sikaflex®-554 on materials at risk of stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracking. This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.Adhesion surfaces must be clean, dry and free from grease, oil, dust and contamination. The surface pre-treatment depends on the specific nature of the substrate and is crucial for a durable bond. Instructions for substrate pre-treatment can be found in the current Sika® pre-treatment table. The information contained therein is based on experience and must always be verified by preliminary tests with original materials.Wide adhesion spectrum: Raw, primed and painted sheet steel Aluminum Stainless steel ABS plastic GRP polycarbonate PUR-soft, PUR-hard Hard PVC wood glass

Sikaflex® 554 - 300 ml cartridge in black Sikaflex®-554 is an elastic one-component STP adhesive system specially developed for bonding large components in industrial production. Sikaflex®-554 shows good adhesion to a wide range of substrates with minimal pre-treatment. Sikaflex®-554 can be accelerated with the Booster and PowerCure system.Product features / advantages Very good weather resistance Good resistance to mold and mildew Good adhesion to a wide range of substrates without primer Good color stability under UV influence Free from solvents, isocyanate, phthalate and PVC High dynamic load-bearing capacity ISEGA certificate for use in the food sector Sikaflex®-554 is suitable for joints that are exposed to dynamic loads. Suitable substrates are metals, especially aluminum, metal primers, paints, sheet steel, ceramic materials and plastics. Sikaflex®-554 shows good adhesion to a variety of substrates with little pre-treatment. Follow the manufacturer's recommendations before using Sikaflex®-554 on materials at risk of stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracking. This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.Adhesion surfaces must be clean, dry and free from grease, oil, dust and contamination. The surface pre-treatment depends on the specific nature of the substrate and is crucial for a durable bond. Instructions for substrate pre-treatment can be found in the current Sika® pre-treatment table. The information contained therein is based on experience and must always be verified by preliminary tests with original materials.Wide adhesion spectrum: Raw, primed and painted sheet steel Aluminum Stainless steel ABS plastic GRP polycarbonate PUR-soft, PUR-hard Hard PVC wood glass

A-J215 - 290ml cartridge in white - High performance construction adhesiveA-J215 is a one-component elastic adhesive based on silane-modified polymers that offers excellent adhesion to most metals, thermoplastics, composites and other common substrates in commercial vehicle construction.Fast curing, highly flexible, free from solvents and isocyanates and low in volatile organic compounds (VOC). Developed for sealing and bonding in commercial vehicle assembly, it is the ideal solution for our mounting systems or flexible solar modules.As a special feature, no activator or primer is required. The special chemistry enables reliable and resistant bonding.Product features / advantages 1-component elastic Fast curing highly flexible free from solvents and isocyanates low content of volatile organic compounds (VOC) color:white L&L Products has worked on the development of an elastomeric adhesive A-J215 which is used by one of the world's leading bus manufacturers for bonding and sealing GRP, stainless steel and aluminum applications. For many years, the major bus manufacturer has used a conventional elastic polyurethane adhesive to bond and seal the side, roof and front/rear panels of its bus models.Before applying the adhesive, each substrate had to be cleaned and primed with a special pre-treatment system. These adhesives, cleaners and primers all contained hazardous substances, including solvents and/or isocyanates. The newly developed adhesive A-J215 is free of solvents and isocyanates.The ideal solution for reliable bonding.Do I need a primer or activator?No, the special composition makes a primer or activator superfluous.Does the surface need to be prepared?We recommend thoroughly cleaning the surface to be bonded in advance (e.g. with spirit or BetaClean) to remove dirt and grease residues.