Yuasa NP1.2-12, 12V 1.2Ah Yuasa has continuously improved its NP series for stationary industrial batteries, industrial batteries, so that the user acquires a mature and commercially and commercially well-established product that has proven its reliability in a proven reliability in a wide range of applications. Service life: 3-5 years according to Eurobat NP batteries can be operated permanently in the side position Impact and break-proof plastic housing made of ABS Have VdS/UL type approvals Electrolyte bound in glass fiber fleece (AGM technology) Corrosion-resistant high-performance grid plates with lead-calcium alloy Long service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP1.2-12Voltage: 12 VoltCapacity: 1,2AhWeight: 570grLength: 97 mmWidth: 48 mmHeight: 55 mmConnection A: Faston 4.8mm

Yuasa NP12-12 lead-acid battery, 12V 12Ah Faston 6.3mm Yuasa has continuously improved its NP series for stationary industrial batteries, series for stationary industrial batteries, so that the user acquires a mature and commercially widely introduced product that has proven its reliability in a large number of applications. Service life: 3-5 years according to EurobatNP batteries can be operated permanently in the side positionImpact and break-proof plastic housing made of ABSHave VdS/UL type approvalsElectrolyte bound in glass fiber fleece (AGM technology)Corrosion-resistant high-performance grid plates with lead-calcium alloyLong service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP12-12Voltage: 12 VoltCapacity: 12 AhVdS approval: YesWeight: 4.0 kgSize (LxWxH): 151 x 98 x 98mmConnection: Faston 6.3mm Comparable batteries: LC-RA1212PGDryfit A512/10SPowerfit S312/12SPowerfit S312/12SRFG21202LC-RA1212PG1MP12-12MP12-12BGenesis NP12-1212FGHL48

Yuasa REC14-12 lead-acid battery Cycle-proof 12V 14Ah VRLA battery optimized for cyclic applications, lead-calcium grid for higher cycle stabilityDouble the number of cycles compared to standard VRLA batteries, electrolyte bound in glass fiber fleece (AGM technology)Microporous glass fiber fleece to prevent vertical acid stratification, valve-controlled design, almost 100% oxygen recombinationSpecial additives in the active material suppress the typical crystalline growth of lead sulphate in cyclical operationImpact and break-resistant plastic housing made of ABS, Very good charging efficiency, Low self-discharge, 3% per month at 20°CFast recovery after deep discharge, operation in any position (except permanently upside down)Production in the UK in accordance with EN ISO 9001, quality management and EN ISO 14001 environmental management, compliant with IEC61056 Technical data: Manufacturer: YuasaType: REC14-12Voltage: 12 VoltCapacity: 14 AhWeight: 4200 gSize (LxWxH): 151 x 98 x 97.5mmConnection: Faston 6.3mmIdentical or comparable batteries:LC-CA1215P,MP15-12C,MP12-12C, WP14-12SE,6-fm-14

Yuasa lead-acid battery NP4-12 12 Volt 4.0 Ah without VdS/UL approval NP 4-12 The Yuasa NP4-12 lead-acid battery is ideal for many different applications, including UPS applications, telecommunications, fire alarm and security systems. You can also use the Yuasa NP4-12 battery in control and regulation systems and in photovoltaic applications. In addition to the many possible applications of the Yuasa NP4-12 lead-acid battery, the Yuasa brand is also characterized by many extremely positive features. We would like to emphasize here, for example, the service life of up to 3-5 years according to Eurobat, as well as the very good charging efficiency, impact and break-proof ABS housing and very low self-discharge. The electrolyte contained is bound in glass fiber fleece. The NP4-12 is maintenance-free, so there is no need to top up the electrolyte and you can use the battery in any position. NP4-12 4000mAh capacity at 12 volt voltage with very low self-discharge Properties and features: Lead-acid battery 12 V, 4 Ah (NP4-12) - Bulk lead-acid batteryIndustrial battery with impact and break-resistant ABS housing (EUROBAT: 3-5 years 'Standard Commercial')Electrolyte bound in glass fiber fleece (AGM technology)Lead-calcium grid for longer service lifeValve-regulated design, almost 100% oxygen recombinationVery good charging efficiency, low self-discharge (3% per month at 20°C)fast recovery after deep discharge, operation in any position (except permanently upside down)EN ISO 9001, EN ISO 14001, IEC61056, ULService life: 3-5 years according to Eurobat, very good charging efficiency, Sony NP batteries can be operated permanently in a sideways positionImpact and break-resistant plastic housing made of ABS, FR housing material flame-retardant on request in accordance with UL 94 VO, in accordance with EN 60707NP batteries manufactured in accordance with EN ISO 9001:2000 quality management system and EN ISO 14001:2000 environmental management systemExtended service life due to a special alloy of the positive plateLong service life with low self-discharge, 3% per month at 20° C Temperature ranges: Charging: -15° C to +50° C Discharging: -15° C to +60° C Storage: -20° C to +50° C Special product features:Valve-controlled design, almost 100% oxygen recombination during each charging processElectrolyte bound in glass fiber fleece (AGM=Absorbing GlassMatt Technology)No need to top up the electrolyteCorrosion-resistant high-performance grid plates with lead-calcium alloyTechnical data Yuasa NP4-12:System Pb lead battery, voltage: 12 Volt, capacity 4000 mAhDimensions LxWxH: approx. 90x70x106mm, weight: 1700 gramsConnector system: Faston 4.8 mm plug contact, capacity/h: 20 hours (C20) Yuasa has continuously improved its NP series for stationary industrial batteries, so that the user acquires a mature and commercially well-established product that has proven its reliability in a large number of applications. - Service life: 3-5 years according to Eurobat - NP batteries can be operated permanently in a lateral position - Impact and break-resistant plastic housing made of ABS - Electrolyte bound in glass fiber fleece (AGM technology) - Corrosion-resistant high-performance grid plates with lead-calcium alloy - Long service life with low self-discharge (3% per month at 20° C)

Yuasa NP4-6 Yuasa has continuously improved its NP series for stationary industrial batteries so that the user acquires a mature and commercially well established product that has proven its reliability in a wide range of applications. Service life: 3-5 years according to Eurobat NP batteries can be operated permanently in the side position Impact and break-proof plastic housing made of ABS Have VdS/UL approvals Electrolyte bound in glass fiber fleece (AGM technology) Corrosion-resistant high-performance grid plates with lead-calcium alloy Long service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP4-6Voltage: 6 VoltCapacity: 4 AhWeight: 0.85 kgSize (LxWxH): 70 x 47 x 106mmConnection: Faston 4.8mm Identical batteries: LC-R064R5P,NP4-6,FG10451,Powerfit S306/4S,MP4.5-6

Yuasa NP2.3-12 Yuasa has continuously improved its NP series for stationary industrial batteries so that the user acquires a mature and commercially well established product that has proven its reliability in a wide range of applications. - Service life: 3-5 years according to Eurobat - NP batteries can be operated permanently in a lateral position - Impact and break-resistant plastic housing made of ABS - Have VdS/UL type approvals - Electrolyte bound in glass fiber fleece (AGM technology) - Corrosion-resistant high-performance grid plates with lead-calcium alloy - Long service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP2.3-12Voltage: 12 VoltCapacity: 2.3 AhWeight: 0.94 kgSize (LxWxH): 177 x 34 x 64mmConnection: Faston 4.8mm Identical batteries: FG20201,BP12-2.1,NP2.3-12,Genesis NP2.3-12,LC-R122R2PG,MP2.2-12,BT12-2.3,Dryfit A512/2S,Powerfit S312/2.3S

YUASA is a manufacturer of maintenance-free stationary industrial batteries with the NP series, whose production in the last decade amounted to over 40 million units, is constantly being improved technically in operational and reliability-determining properties, so that the user acquires an absolutely mature product, which can achieve in a variety of up to 5 years under optimal operating conditions. Design Excellent high-current properties Very good charging efficiency No dangerous goods according to IATA Long service life with low self-discharge Applications: UPS, telecommunications, emergency lighting systems, fire alarm and security systems, control and regulation systems, electronic test equipment Notes This battery is officially approved by the Association of German Property Insurers for use in alarm systems. Product characteristics: Electrolyte bound in glass fiber fleece (AGM technology),Lead-calcium grid for longer service life,valve-controlled design, almost 100% oxygen recombination,very good charging efficiency, low self-discharge (3% per month at 20°C),fast recovery after deep discharge, operation in any position (except permanently upside down) Comparable batteries: NP7-12FR, LC-R127R2PG, EP1229W, HR1234W, GP1272, NP7-12, NP7-12L, MP7.2-12, A512/6.5S, S312/7SR, CP1270, PS-1270, BP7-12 Technical data: Manufacturer: YuasaType: NP7-12Voltage: 12VoltPower: 7000mAhWeight: 2650 gDimensions L,W,H: 151 x 65 x 98mmConnection: Faston 6.3mmVdS approval: Yes

Yuasa NP17-12L, 12V 17Ah Yuasa has continuously improved its NP series for stationary industrial batteries, series for stationary industrial batteries, so that the user acquires a mature and commercially well-established product that has proven its reliability in a large number of applications. Service life: 3-5 years according to EurobatNP batteries can be operated permanently in the side positionImpact and break-proof plastic housing made of ABSHave VdS/UL type approvalsElectrolyte bound in glass fiber fleece (AGM technology)Corrosion-resistant high-performance grid plates with lead-calcium alloyLong service life with low self-discharge (3% per month at 20° C) Comparable batteries: FG21803LC-XD1217PA512/16G5S312/18G5MP18-12NP18-12R Technical data: Manufacturer: YuasaType: NP17-12LVoltage: 12 Volt Power: 17000mAhWeight: 5950 gDimensions L,W,H: 181x 76x 167mm Connection: M5 screw connectionVdS approval: Yes

Yuasa lead-acid battery NP7-12L, 12V 7Ah Electrolyte bound in glass fiber fleece (AGM technology),Lead-calcium grid for longer service life,valve-regulated design, almost 100% oxygen recombination,very good charging efficiency, low self-discharge (3% per month at 20°C),fast recovery after deep discharge, operation in any position (except permanently upside down) Comparable batteries: NP7-12FR, LC-R127R2PG, EP1229W, HR1234W, GP1272, NP7-12, NP7-12L, MP7.2-12, A512/6.5S, S312/7SR, CP1270, PS-1270, BP7-12 Technical data: Manufacturer: YuasaType: NP7-12LVoltage: 12VoltPower: 7000mAhWeight: 2650 gDimensions L,W,H: 151 x 65 x 98mmConnection: Faston 6.3mmVdS approval: Yes

VRLA batteries Yuasa REC series We present the REC series batteries from Yuasa. Compact lead-acid batteries with low self-discharge rates can be stored for long periods without permanent loss of capacity. They feature the latest oxygen recombination technology and a safe low-pressure venting system. The REC range includes extremely powerful VRLA batteries with excellent recovery from deep discharge and can be operated in any orientation. Why should you buy a REC battery? They offer low maintenance and a valve regulated design combined with robust plates and an innovative separator system that ensures reliable high quality cyclic batteries. They are typically used in applications such as golf buggies and mobility scooters. Features: VRLA high-performance battery with high cyclic performanceSealed lead-acid batteries (SLA)Robust lead-calcium grids for an outstanding cyclic service lifeDouble the service life compared to conventional VRLA batteriesAbsorbed glass mat without free acid (AGM)Gas recombinationHousing material: ABSExcellent recovery after deep dischargeOperation in any orientation (without continuous reverse use)Eurobat classification: 6 to 9 years Technical data: Type: REC22-12IFeatures: Cycle-proofVoltage: 12 VoltCapacity: 22AhWeight: 6.2KgLength: 181mmWidth: 76.2mmHeight: 167mmConnection A: M5 female thread

Yuasa NP3.2-12 lead-acid battery 12V 3.2Ah High battery quality, reliability and energy densitymaintenance-free for an average of 5 years and can be operated in any position (at 25 °C)Areas of application: UPS, main and auxiliary power supply, emergency lighting, etc.ApplicationsMain power supply, emergency lighting, emergency power supply,uninterruptible power supply (UPS), backup power supply,non-cyclical applications Technical data: Voltage: 12Vmax. capacity: 3.2AhConnection: Faston type (4.8 mm)Length: 134mmwidth: 67mmHeight: 64mmWeight: 1200g

YUASA Hochstrom Bleiakku NP5-12L 12 Volt 5,0 Ah mit 6,3mm Steckanschlüssen Der YUASA Hochstrom Bleiakku NP5-12L ist die ideale Wahl für eine Vielzahl von Anwendungen, die eine zuverlässige und leistungsstarke Energiequelle erfordern. Mit einer Spannung von 12 Volt und einer Kapazität von 5,0 Ah bietet dieser Akku eine herausragende Leistung und Langlebigkeit. Ausgestattet mit 6,3mm Steckanschlüssen, lässt sich der Akku einfach und sicher in verschiedene Systeme integrieren. Robustheit und Langlebigkeit Die Bauweise des YUASA NP5-12L überzeugt durch ihre Robustheit und Beständigkeit. Der Akku ist widerstandsfähig gegen Vibrationen und Stöße, was ihn besonders für den Einsatz in anspruchsvollen Umgebungen prädestiniert. Das schlag- und bruchfeste Kunststoffgehäuse aus ABS sorgt für zusätzliche Sicherheit und Schutz. Dank der Verwendung von hochleistungsfähigen Gitterplatten mit Blei-Kalzium-Legierung bietet der Akku eine hohe Lebensdauer bei geringer Selbstentladung. AGM-Technologie für höchste Zuverlässigkeit Der NP5-12L verwendet die AGM-Technologie (Absorbent Glass Mat), bei der der Elektrolyt in Glasfaservlies gebunden ist. Diese Technologie bietet mehrere Vorteile: Hohe Zyklenfestigkeit: Ideal für Anwendungen mit häufigen Lade- und Entladezyklen. Wartungsfreiheit: Kein Nachfüllen von Wasser erforderlich. Sicherer Betrieb: Kein Auslaufen von Elektrolyt, selbst bei Beschädigung des Gehäuses. Vielseitige Einsatzmöglichkeiten Dank seiner hohen Leistungsfähigkeit und Zuverlässigkeit eignet sich der YUASA NP5-12L für eine breite Palette von Anwendungen: USV-Systeme (unterbrechungsfreie Stromversorgungen): Sicherstellung der Stromversorgung bei Stromausfällen.Notstromversorgungen: Für kritische Geräte und Systeme.Medizinische Geräte: Zuverlässige Energiequelle für lebenswichtige Apparaturen.Elektrische Werkzeuge: Hohe Leistung für anspruchsvolle Anwendungen.Telekommunikationsanlagen: Konstante und stabile Stromversorgung. Warum den YUASA NP5-12L AGM Akku kaufen? Lange Lebensdauer: 3-5 Jahre nach Eurobat-Norm.Robust und widerstandsfähig: Schlag- und bruchfestes ABS-Gehäuse.Hohe Zuverlässigkeit: AGM-Technologie für sichere und stabile Leistung.Geringe Selbstentladung: Nur 3% pro Monat bei 20°C.Wartungsfrei: Kein Nachfüllen von Wasser erforderlich. Mit dem YUASA Standard Bleiakku NP5-12L sind Sie bestens ausgestattet für jede Herausforderung. Ob für kritische Anwendungen in der Medizin, im Notstrombereich oder für leistungsstarke Werkzeuge, dieser Akku liefert stets die benötigte Energie und Zuverlässigkeit. Greifen Sie jetzt zu und erleben Sie die Qualität und Leistungsfähigkeit, die nur ein Yuasa Akku bieten kann!Liferumfang: 1x Yuasa NP5-12L 12V 5Ah USV-Batterie

Maintenance-free lead/fleece battery NP24-12l (fleece technology or AGM technology) from Yuasa EUROBAT class: 3 to 5 yearsVRLA battery for general useLead-calcium grid for longer service lifeConstruction with absorbent glass mat and without free acidGas recombinationGood recovery after deep dischargeOperation in any orientation (running reverse use excluded)Robust plastic housing made of ABS Technical data: Nominal voltage 12 VoltNominal capacity 24 Ah (20h)Dimensions LxWxH 166 x 175 x 125mmVdS approvalConnection: M5 screw thread Applications UPSTelecommunicationsEmergency lighting systemsFire alarm and security systemsControl and regulation systemsElectronic test equipmentMedical technology

Valve-regulated lead-acid battery with a high energy density and high discharge capacity. Unlimited options for combining different battery types in the series in parallel operation. Position-independent operation due to the absence of free, unbound electrolyte (fleece technology AGM = Absorbing Glass Matt). Technical characteristics EUROBAT class: 10 to 12 years 'Long Life'High-performance battery for critical UPS applicationsLead-calcium grid for longer service lifeElectrolyte bound in glass fiber fleece (AGM technology)Valve-regulated design, almost 100% oxygen recombinationImpact and break-proof plastic housing made of ABSOptional: FR housing (flame retardant according to UL94 V0)Very good charging efficiencyLow self-discharge, 3% per month at 20°CFast recovery after deep dischargeOperation in any position (except permanently upside down)Manufactured in accordance with EN ISO 9001 quality management and EN ISO 14001 environmental managementCompliant with IEC61056, IEC60896-21/22, UL

Product information "Yuasa NPL24-12i PB lead-acid battery, with M5 countersunk screw connection 175x165x125mm" Yuasa NPL24-12i PB lead acid battery M5 countersunk screw connection 175x165x125mm Yuasa has continuously improved its NP series for stationary industrial batteries, so that the user acquires a mature and commercially well-established product that has proven its reliability in a variety of applications. Service life: up to 3-5 years according to Eurobat, NP batteries can be operated permanently in the side position, impact and break-proof plastic housing made of ABS. Depending on type, have VdS/UL approvals, electrolyte bound in glass fiber fleece AGM technology. Corrosion-resistant high-performance grid plates with lead-calcium alloy - Long service life with low self-discharge (3% per month at 20° C) Technical data Yuasa NPL24-12i : Voltage: 12 Volt, mAh: 24000mAhL/W/H: 175 / 165 / 125 mm, System: Pb leadWeight: 9700 grams, connector system: M5 countersunk screw connection

The Yuasa NP3-6 is a 6V 3Ah sealed AGM battery that provides reliable and maintenance-free power for various applications. The battery features a valve regulated design that prevents electrolyte leakage from the case or terminals. The battery also has a lead-calcium grid that provides superior life and performance. The Yuasa NP3-6 is suitable for alarm systems, emergency lighting, backup power, medical devices and more. The battery has a length of 134 mm, a width of 34 mm, a height of 64 mm and a weight of 0.65 kg. The battery has an F1 connection type and can be operated in any orientation except permanently inverted. The battery has a floating charge voltage of 6.825 V at 20°C, a cyclic charge voltage of 7.26 V at 20°C and a maximum discharge current of and a service life of up to 5 years at 20°C.

Yuasa NP65-12I 12V 65Ah lead-acid battery / AGM battery Valve-regulated lead-acid battery with advanced AGM (Absorbent Glass Mat) technology Yuasa NP65-12I / 12V - 65Ah, with VdS approval. The NP65-12I from the Yuasa NP standard series is ideal for standby and light cyclic applications, including fire and security systems, emergency lighting, solar and wind, UPS or toys. The lead-acid battery can be operated in any position except permanently overhead. Safety valves ensure pressure equalization in the event of severe overcharging. The battery has a service life of up to 3 - 5 years in standby applications, and up to 1000 discharge/charge cycles are possible in cyclic operation. For further information and instructions for use, see the data sheet in the download area.

Valve-regulated lead-acid battery with a high energy density and high discharge capacity. Unlimited options for combining different battery types in the series in parallel operation. Position-independent operation due to the absence of free, unbound electrolyte (fleece technology AGM = Absorbing Glass Matt). Technical characteristics EUROBAT class: 10 to 12 years 'Long Life'High-performance battery for critical UPS applicationsLead-calcium grid for longer service lifeElectrolyte bound in glass fiber fleece (AGM technology)Valve-regulated design, almost 100% oxygen recombinationImpact and break-proof plastic housing made of ABSOptional: FR housing (flame retardant according to UL94 V0)Very good charging efficiencyLow self-discharge, 3% per month at 20°CFast recovery after deep dischargeOperation in any position (except permanently upside down)Manufactured in accordance with EN ISO 9001 quality management and EN ISO 14001 environmental managementCompliant with IEC61056, IEC60896-21/22, UL

Yuasa NP38-12I lead-acid battery, 12V 38Ah Yuasa has continuously improved its NP series for stationary industrial batteries, so that the user acquires a mature and commercially well-established product that has proven its reliability in a wide range of applications. Service life: 3-5 years according to EurobatNP batteries can be operated permanently in the side positionImpact and break-proof plastic housing made of ABSHave VdS/UL type approvalsElectrolyte bound in glass fiber fleece (AGM technology)Corrosion-resistant high-performance grid plates with lead-calcium alloyLong service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP38-12IVoltage: 12 VoltCapacity: 38 AhVdS approval: YesWeight: 13.8 kgSize (LxWxH): 197 x 165 x 175mmConnection: M5 screw connection

Yuasa lead-acid battery REC50-12I Pb 12V / 50Ah cycle-proof, M5 internal thread Technical data: System: PbVoltage: 12 VCapacity: 50 AhVPE: TrayConnector system: Internal threadCell type: IndustrialOperating temperature: -15°C to +50°CLead connection system: countersunk screw connectionSize of lead connection: M5Properties: cycle-proofLength: 197 mmWidth: 165 mmHeight: 175 mmNet weight: 15.3 kgVdS approval: NoIEC designation: otherManufacturer: YuasaManufacturer- Art. No.: REC50-12I Typical applications: Golf cartMobility scootersSolar and windRenewable energyAutomatically guided vehiclesEmergency lightingMeasuring devices Other features: VRLA high-performance battery with high cyclic performanceSealed lead-acid batteries (SLA)Robust lead-calcium grids for an outstanding cyclic service lifeDouble the service life compared to conventional VRLA batteriesAbsorbed glass mat without free acid (AGM)Gas recombinationExcellent recovery after deep dischargeEurobat classification: 6-9 years

Yuasa RE7-12L 12V 7Ah lead-acid battery / AGM battery Valve-regulated lead-acid battery / battery with advanced AGM (Absorbent Glass Mat) technology Yuasa RE7-12L / 12V - 7Ah. The RE7-12L lead acid battery from the Yuasa RE - VRLA series with a long service life of up to 6 - 9 years according to Eurobat is ideally suited for standby and light cyclic applications, including fire and security systems, emergency lighting, solar and wind, UPS or toys. The non-woven battery is maintenance free and can be operated in any position except permanently upside down. Safety valves provide pressure equalization in the event of severe overcharging. For further information and instructions for use, see data sheet in the download area.

The Yuasa NP1.2-6 is a 6V 1.2Ah sealed AGM battery that provides reliable and maintenance-free power for various applications. The battery has a valve regulated design that prevents electrolyte leakage from the case or terminals. The battery also has a lead-calcium grid that provides superior life and performance. The Yuasa NP1.2-6 is suitable for alarm systems, emergency lighting, backup power, medical devices and more. The battery has a length of 97 mm, a width of 25 mm, a height of 54.5 mm and a weight of 0.31 kg. The battery has an F1 connection type and can be operated in any orientation except permanently inverted. The battery has a float charge voltage of 6.825 V at 20°C, a cyclic charge voltage of 7.26 V at 20°C and a maximum discharge current of 36 A for one second or 12 A for one minute. The battery has an impedance of 60 mΩ measured at 1 kHz and a service life of up to 5 years at 20°C.

Yuasa NP12-6 Yuasa has continuously improved its NP series for stationary industrial batteries so that the user acquires a mature and commercially well established product that has proven its reliability in a wide range of applications. - Service life: 3-5 years according to Eurobat - NP batteries can be operated permanently in a lateral position - Impact and break-resistant plastic housing made of ABS - Have VdS/UL type approvals - Electrolyte bound in glass fiber fleece (AGM technology) - Corrosion-resistant high-performance grid plates with lead-calcium alloy - Long service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP12-6Voltage: 6 VoltCapacity: 12 AhWeight: 2.15 kgSize (LxWxH): 151 x 50x 98mmConnection: Faston 6.3mm Identical batteries: FG11201,LC-R0612P,Dryfit A506/10S,NP12-6,LC-R0612P1,Powerfit S306/12S,MP10-6,Genesis NP12-6T,Powerfit S306/12SR,MP12-6

Yuasa NP7-6 Yuasa has continuously improved its NP series for stationary industrial batteries so that the user acquires a mature and commercially well established product that has proven its reliability in a wide range of applications. - Service life: 3-5 years according to Eurobat - NP batteries can be operated permanently in a lateral position - Impact and break-resistant plastic housing made of ABS - Have VdS/UL type approvals - Electrolyte bound in glass fiber fleece (AGM technology) - Corrosion-resistant high-performance grid plates with lead-calcium alloy - Long service life with low self-discharge (3% per month at 20° C) Technical data: Manufacturer: YuasaType: NP7-6Voltage: 6 VoltCapacity: 7 AhWeight: 1.34 kgSize (LxWxH): 151 x 34 x 98mmConnection: Faston 4.8mm Identical batteries: LC-R067R2P,MP7-6,FG10721,Powerfit S306/7S