Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B The Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-03 Bike-Power Lithium 4Ah motorcycle battery LTM14-B Adhesive adapter pads (spacers) Connection screws

Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 The Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 has an extremely low self-discharge rate of a maximum of 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-02 Bike-Power Lithium 3Ah motorcycle battery LTM9 Adhesive adapter pads (spacers) Connection screws

Intact LI-09 Bike-Power 3Ah Lithium Motorcycle Battery HJTX9-FP The Intact LI-09 Bike-Power 3Ah Lithium motorcycle battery HJTX9-FP is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-09 Bike-Power 3Ah lithium motorcycle battery HJTX9-FP is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-09 Bike-Power 3Ah lithium motorcycle battery HJTX9-FP is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-09 Bike-Power 3Ah lithium motorcycle battery HJTX9-FP has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-09 Bike-Power 3Ah lithium motorcycle battery HJTX9-FP can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-09 Bike-Power 3Ah lithium motorcycle battery HJTX9-FP is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-09 Bike-Power 3Ah lithium motorcycle battery HJTX9-FP is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-09 Bike-Power 3Ah Lithium motorcycle battery HJTX9-FP Adhesive adapter pads (spacers) Connection screws

Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L The Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-01 Bike-Power Lithium 2Ah motorcycle battery LTM7L Adhesive adapter pads (spacers) Connection screws

Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 The Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 has an extremely low self-discharge rate of a maximum of 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-04 Bike-Power Lithium 4Ah motorcycle battery LTM14 Adhesive adapter pads (spacers) Connection screws

Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 The Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-05 Bike-Power Lithium 5Ah motorcycle battery LTM18 Adhesive adapter pads (spacers) Connection screws

Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L The Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-06 Bike-Power Lithium 6Ah motorcycle battery LTM21L Adhesive adapter pads (spacers) Connection screws

Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP The Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-08 Bike-Power Lithium 1.6Ah motorcycle battery HJTX5L-FP Adhesive adapter pads (spacers) Connection screws

Intact LI-10 Bike-Power 4Ah Lithium Motorcycle Battery HJTX14H-FP The Intact LI-10 Bike-Power 4Ah Lithium motorcycle battery HJTX14H-FP is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-10 Bike-Power 4Ah lithium motorcycle battery HJTX14H-FP is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-10 Bike-Power 4Ah lithium motorcycle battery HJTX14H-FP is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-10 Bike-Power 4Ah lithium motorcycle battery HJTX14H-FP has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-10 Bike-Power 4Ah lithium motorcycle battery HJTX14H-FP can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-10 Bike-Power 4Ah lithium motorcycle battery HJTX14H-FP is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-10 Bike-Power 4Ah lithium motorcycle battery HJTX14H-FP is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-10 Bike-Power 4Ah Lithium motorcycle battery HJTX14H-FP Adhesive adapter pads (spacers) Connection screws

Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L The Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L is the most innovative top product in the motorcycle battery range. The Intact Bike-Power Lithium series is equipped with the latest lithium-ion technology (LiFePO4) and has been specially developed for modern motorcycles. The Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L is manufactured in a special nylon housing with cast brass terminals and is therefore extremely heat-resistant. This Intact motorcycle battery is also installed in a waterproof housing. The charge status of the individual cells is regulated thanks to a built-in processor (balancer) and guarantees the highest safety standard for lithium-ion batteries (LiFePO4). The Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L is equipped with an LED charge level indicator, which means thatup to 75% weight canbe saved compared to conventional standard batteries (lead-acid batteries)when used in a targeted manner . Intact lithium-ion batteries use iron phosphate as the cathode material and are manufactured using the lithium-polymer process. This means that these batteries cannot burst into flames or explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium-ion batteries. The Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L has an extremely low self-discharge rate of maximum 1% per month. The lightweight motorcycle battery is completely suitable for everyday use, although its starting ability at temperatures below zero degrees Celsius is limited. There is also no memory effect with this motorcycle battery. There is no risk of leakage as there is no lead or acid. This means that the Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L can be installed horizontally without any problems. This battery is also more environmentally friendly than conventional motorcycle batteries. The Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L is ideal for motorcycles, scooters, jet skis, lawn mowers, snowmobiles, ATVs/quads and motor sports bikes. Under no circumstances should chargers be used that desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process. The maximum charging voltage of 14.9 volts must not be exceeded, otherwise there is a risk of explosion. The Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L is topped up and charged, so it is ready to go straight away. The Intact motorcycle battery is supplied with adhesive adapter pads (spacers) and connection screws. Advantages: Absolutely maintenance-free Immediately ready for use (felt and charged) Heat-resistant nylon housing Waterproof housing OEM quality LED charge level indicator More environmentally friendly than conventional motorcycle batteries High performance Low self-discharge (maximum 1% per month) Can also be used in a tilted position (up to 90°) Lithium-ion technology (LiFePO4) Longer service life Completely sealed Completely leak-proof Includes connection screws and adhesive adapter pads (spacers) in the scope of delivery Up to 75% weight saving compared to conventional motorcycle batteries Applications: Motorcycle Scooter Quad / ATV jet ski Ride-on mower Snowmobile Scope of delivery: Intact LI-07 Bike-Power Lithium 8Ah motorcycle battery LTM30L Adhesive adapter pads (spacers) Connection screws