Balkonkraftwerke 0%

The modular concept of the Growatt APX battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure. The APX battery system contains: APX 5.0P-B1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)APX 98034-P2 BMS power moduleAPX battery base High-voltage batteryOptional: SYN 50 XH 30 Back-Up Box emergency backup power The APX battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the aid of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. APX 5.0P-B1 high-voltage battery The APX 5.0P-B1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system. The APX high-voltage battery: Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at BMS levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warranty Long cycle life The APX battery system is based on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (BMS), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Technical data: Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warranty Battery management system The new Growatt APX 98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. The important thing is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Battery base The Growatt APX Battery Base is suitable for the ground installation of Growatt APX battery modules and the associated BMS. It ensures that the battery tower stands securely. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm SYN 50-XH-30 Back-UP Box The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by its user-friendly design, which makes it easy to install and operate. The SYN Back-Up Box: Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-XH BP series Technical data: Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Compatible inverters The following hybrid inverters are intended for the storage system: MOD 3KTL3-XH BPMOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD6KTL3-XH BPMOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP

The Pylontech US2000C (MPN US2000NB02V00201) is a lithium storage tank of the latest generation. The storage tank has been specially developed to fully meet the high demands placed on a solar storage tank today. Maximum safety and a long service life are guaranteed even with regular deep discharges thanks to the latest technology. The latest battery from the market-leading manufacturer, now with 2.4kWh per module, once again has a battery management system (BMS) built into each module and therefore offers a high level of safety. This means that the individual cells are monitored internally and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner. The battery is compatible and certified with many available inverters. Features Extremely cycle-resistant - over 6000 cycles at 95% DoD More usable energy content than the previous US2000 model Service life of over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from RJ45 port Pre-charge function to protect the ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire service life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharging Overvoltage during charging excessive currents during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech US2000C modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 48V Nominal capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (discharge) charging current: 90A Communication: RS485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 year manufacturer's warranty Certification: IEC62619, CE, UN38.3 Due to the classification as dangerous goods, this product will be shipped by a forwarding agent! Scope of delivery: 1x Pylontech US2000C LiFePO4 2.4 kWh1x cable set parallel connection incl. earthing1x RJ45 data cable1x mounting screws1x operating instructions

The Pylontech UP2500(MPN UP2500) is a lithium storage tank of the latest generation. The storage tank has been specially developed to fully meet the high demands placed on a solar storage tank today. Maximum safety and a long service life are guaranteed even with regular deep discharges thanks to the latest technology. The latest battery from the market-leading manufacturer with 2.8 kWh per module once again has a battery management system (BMS) built into each module and therefore offers a high level of safety. This means that the individual cells are monitored internally and protected against overvoltage, overtemperature, deep discharge, etc. in a balanced manner. The battery is compatible and certified with many available inverters. Features Extremely cycle-resistant - over 6000 cycles at 95% DoD Service life over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging capacity possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Pre-charge function to protect the ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire service life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharging Overvoltage during charging excessive currents during charging and discharging over- and undertemperature Short circuit and reverse polarity Continuous monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the required storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) battery and an integrated BMS. Long cycle life The extremely long cycle life of the LiFePo4 cells used make Pylontech Up2500 modules the ideal storage solution for photovoltaic systems. Regardless of whether the solar system is a grid-connected or stand-alone system, the Pylontech storage system offers several advantages over typical lead batteries and other lithium technologies. Technical data Battery type: Lithium iron phosphate (LiFePo4) Nominal voltage: 25.6V Nominal capacity: 110 Ah / 2.84 kWh Usable capacity (95% DoD): 99.6 Ah / 2.55 kWh Discharge voltage range: 23.3 - 28.5V Charging voltage range: 28.2 - 28.5V Max. (discharge) charging current: 85A Communication: Can, RS485 Weight: 26.5 kg Dimensions: 442 x 420 x 120 mm Protection class: IP20 Operating temperature range: 0°C - +55°C Storage temperature range: -10°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Certification: IEC62619, CE, RoHS, UN38.3 Due to the classification as dangerous goods, this product will be shipped by forwarding agent! Scope of delivery: 1x Pylontech UP2500 LiFePO4 2.88 kWh 1x cable set parallel connection incl. earthing 1x operating instructions

The NOAH2000 from Growatt (MPN: NOAH2000) is a LiFePO4 battery storage system for your balcony power station and impresses with its high cycle stability and self-heating function, among other things. With a nominal voltage of 51.2 V and a capacity of 2048 Wh, the battery provides you with outstanding performance under high loads. If required, you can flexibly expand the system to a total of up to 8192 Wh. Thanks to the advanced self-heating technology, the battery module also continues to work without any problems in winter environments at sub-zero temperatures. Of course, you can view and control everything in real time using the system monitoring app (ShinePhone). You can connect up to 4 solar modules with a maximum total output of 1800 W directly to the storage system. The storage system can be completed with the matching NEO 800M-X micro inverter. The NOAH2000 at a glance Self-heating functionCycles: 6000+Up to 4 battery modules (total 8192Wh)Up to 4 solar modules (total 1800W)App use - Growatt monitoring platformPlug and playModular and flexibleQuick and easy installation in 5 minutesManufacturer's warranty: 10 yearsCertifications: CE, ROHS, REACH Flexible expansion The NOAH2000 offers a high degree of flexibility thanks to its expandable configuration options, which range from 2048Wh to 8192Wh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Long cycle life The NOAH battery module is an ideal storage solution for your photovoltaic system due to its extremely long cycle life and the use of LiFePo4 cells. The Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Ready for use within a few minutes The storage system uses the NEO 800M-X inverter and is compatible with MC4 connectors. Installation is very easy thanks to the plug-and-play principle. All you have to do is attach the micro inverter to the wall and connect the battery via a connection cable. You can connect up to 4 solar modules of up to 450W each with a total output of 1800W to one module using 2-way Y-connectors. The inputs are located directly on the NOAH2000. Use energy, reduce costs The system stores excess energy in the battery during the day and then makes it available whenever you need it to increase the efficiency of solar power use. Working modes Load First: Solar energy supplies the connected loads with top priority Battery First: Solar charging has top priority for the battery Technical data Battery type: LiFePO4Capacity: 2048 WhMax. Capacity: 8192 Wh (4 battery modules)Max. Charging power: 2000 WNominal voltage: 51.2 VMax. Charging current: 40 AMPPT efficiency: 99%Charging temperature range: 0 - +45°CDischarging temperature: -20 - +45°CProtection class: IP66Weight: 23 kgDimensions: 406 x 235 x 270 mm PV input Recommended PV input power: Max. 2 x 900 WMax. PV input voltage: 60 VMPPT voltage range: 16-60 VMPPT full power voltage range: 30-48 VMax. Input current: 26 A + 26 AMPP tracker: 2Strings per MPP tracker: 1 Battery output (DC to micro inverter) Max. Output power: 800 WOutput voltage range: 40-50 VMax. Output current: 20 A Scope of delivery: 1x Growatt NOAH2000 LiFePO4 battery module 2048Wh 4x extension cable for PV input 3m 2x DC output cable 3m 2x cable fuse 1x mounting bracket 1x MC4 mounting tool

The Growatt APX Battery Base is suitable for the floor installation of Growatt APX battery modules and the associated BMS. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. APX battery base for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX battery base

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

The Growatt ARK Battery Base is suitable for the floor installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. ARK battery base for floor mounting of Growatt ARK HV and XH batteriesOne base per battery towerWeight: 3kg The ARK battery system The Growatt ARK battery system has a modular design. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25A. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is cobalt-free, which results in a more cost-effective battery, for example. The battery has a service life of over 6000 cycles. Scope of delivery: 1x Growatt ARK battery base

The ARK low-voltage storage system from Growatt can be used flexibly and expanded as required thanks to its modular concept. A battery tower can be set up with a minimum of 1 to a maximum of 10 ARK high-voltage batteries. A connection cable set is included for commissioning with a compatible inverter. The battery base is also available as an option for ground installation. The Growatt low-voltage battery system includes: Growatt ARK 2.5L-A1 low-voltage battery LifePO4 2.56 kWh (1-10x depending on selection)Optional: Battery base ground installation Compatible inverters SPA and SPH 1-phase inverters The Growatt ARK 2.5L low-voltage battery (MPN ARK-2.5L-A1) offers maximum safety thanks to cobalt-free LiFePO4 batteries. The modular, stackable concept allows flexible application for different scenarios and is easy to install. The battery, with the integrated BMS, offers a long service life and excellent performance under high loads. Soft start is used to prevent overvoltage in the system. The ARK low-voltage storage units are only compatible with the single-phase SPH inverter series. About the ARK 2.5L-A1 battery: Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)Wall or floor installation possibleHigh cycle stability and long service lifeSoft start to protect the system from overvoltageRemote diagnosis and firmware updateIP65 protection class for outdoor installation10-year guarantee The ARK battery system Thanks to its modular concept, the ARK system can be used flexibly and expanded as required. A battery tower can be installed with at least 2 and up to 10 storage modules. A connection cable set is required for connection to the inverter. An additional battery base per tower is required for ground installation. The ARK LV storage systems are compatible with the single-phase SPH inverter series and the SPF3500 off-grid inverter. Areas of application For grid-connected and stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (UPS) Flexible expansion The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Integrated BMS The Battery Management System (BMS) of the Growatt ARK low-voltage battery monitors a number of important parameters to ensure efficient and safe battery performance. It monitors the battery's state of charge (SOC), mains voltage, current flow, cell voltage and cell and PCBA temperature. By precisely controlling these parameters, the BMS ensures optimal use of the battery, protects against potential damage and extends the service life of the battery. Long cycle life The Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Technical data: Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56 kWh/50AhUsable capacity: 2.3 kWh/45AhNominal voltage: 51.2 VOperating voltage range: 47.2-56.8 VCharging/discharging current: 25AProtection class: IP65Operating temperature range: -10°C - +50°CDimensions: 650 x 260 x 185 mmWeight: 28 kgCertificates: IEC62619, CE, CEC, RCM, UN38.3

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

The TPM-E electricity meter from Growatt is a 3-phase complete solution for grid export limitation and self-consumption monitoring, the data of which can be read on an LCD display. It is characterized by high measurement accuracy and easy installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor three-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 72 x 94.5 x 65 mmWeight: 398 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Power supply type: 3P4WInput voltage: 320-520V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt TPM-E 3-phase electricity meter

The APX 5.0P-B1 battery module from Growatt ( MPN APX 5.0P-B1) is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system. The APX series is also compatible with the new inverter series with backup function: MOD-XH BP The APX high-voltage battery: Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at BMS levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warranty The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be installed with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. You can choose between the APX 98020-P1 or the APX 98034-P2. This must be purchased separately. The BMS must be purchased separately and an additional base is required for ground mounting. Flexible expansion The APX battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. Long cycle life The APX battery system uses LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (BMS), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Technical data: Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warranty Scope of delivery: 1x Growatt APX 5.0P-B1 5kWh high-voltage battery

Growatt BDC 95045-A1 high-voltage battery management system for your energy storage solution.CompatibilityGrowatt BDC 95045-A1 High Voltage Battery Management System is designed for the ARK 2.5H-A1 High Voltage battery units.It is also suitable for communication with the following hybrid inverters from the Growatt MIN-XH and MOD-XH series: MIN2500-6000 TL-XH, MOD3000-10000 TL3-XHSmart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgradeWarranty:10-year Growatt warranty (see warranty document in Downloads)Scope of deliveryThe Growatt BDC 95045-A1 High Voltage Battery Management System

The Growatt GBLI6532 6.5kWh 51.2V low-voltage LiFePO4 battery is Growatt's low-voltage battery for the single-phase inverters in the SPH and SPF series. The lithium battery is the cheapest and most durable solution, as it can be discharged over 6000 times with a discharge rate of up to 90%. Up to two batteries can be connected in parallel, which together achieve an output of 13kWh. Specifications: Weight of 57.5 kgNominal output of 6.5 kWp and usable output of 6 kWpDoD of 94.5 %Bracket for wall mounting included in the scope of deliveryNominal voltage (V): 51.2 VNominal capacity (Wh): 6500 WhUsable capacity (Wh): 6000 WhDimensions (mm): 475 x 765 x 145 mmOperating voltage (V): 48 - 57.6Charge/discharge current (A): 104.2Communication port: RS485 | KÖNNEN 2.0Operating temperature (C): -10 - 50CRegulated temperature (C): -20 - 45CApprovals: IEC62619 | CE | RCM | UL1973 | CEC | UN38.3+PI965Charge cycles: > 6000 (25C) Growatt GBLI6532 lithium battery 6.5 kWh is supplied fully charged by Growatt. The battery may only be connected when room temperature has been reached. Compatibility The Growatt GBLI6532 6.5kWh 51.2V low-voltage battery is compatible with Growatt SPH and SPF single-phase inverters. The connection cable art. no. 9888245 is required for connection to the inverter and a battery. When connecting two batteries to the inverter, the connection cable art. no. 9888246 is required. Warranty: 10-year Growatt warranty (see warranty document in Downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation.

This Growatt cable set is for SPH inverters and GBLI batteries. A power cable and a communication cable for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

This Growatt cable set is for connecting SPH inverters and 2x GBLI batteries if you want to connect two such batteries in parallel. These are power cables and communication cables for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable set is mandatory when connecting two GBLI batteries to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 2 communication cables in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

The Shine Lan-X data logger enables a secure and direct Ethernet connection between Growatt inverters and the Internet router. This makes it easy to monitor and maintain installed Growatt devices online. The data from the connected Growatt inverters is stored on the Shine LAN-X data logger for up to one month. The data transfer rate of the USB port is up to 12 Mbps and up to 10 Mbps via the LAN connection. Plug&PlayNo configurationImmediately ready for operation

With the Growatt ShineLink WiFi module, all inverter data is stored and can be accessed via the Shinelink. This gives a clear picture of the performance of the Growatt inverters and the data archive of the ShineLink is backed up for 30 days. The ShineLink can monitor up to 8 inverters and has a range of 120 meters. The Growatt ShineLink-X data logger (MPN: ShineLink-X) is used for online monitoring and maintenance of a Growatt inverter. Memory data is recorded over a period of one month. Data protection plays a major role in wireless communication, so this information can be encrypted. The Growatt servers are based in Frankfurt.The ShineLink-X at a glanceMonitoring of up to 8 invertersRatio frequency communication120m rangePlug and playAutomatic IP addressingEncrypted dataBuilt-in memory for one monthCable-free, easy installationGrowatt Shine monitoring platformThe Growatt monitoring platform can be used with the ShineLink-X. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. All Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends.Compatible inverter series:MIC 600-3300TL-XMIN 2500-4600TL-X/XH/XAMOD 3-15KTL3-X/XHMID 17-22KTL3-X/XHMID 25-40KTL3-XMAX 50-80KTL3 LVMAX 100-125KTL3 LVSPH 3000-6000TL BL-UPSPH 4000-10000TL3 BH-UPSPA 4000-10000TL3 BH-UPTechnical data:Communication: Rf433 - up to 120m (under free field conditions)Input voltage AC power supply: 196-250VDimensions: 105 x 85 x 26 mmWeight: 1kgMounting: Table or wall mounting possibleProtection class: IP30Status display: LEDOperating temperature range: -20°C - +65°CManufacturer's warranty: 1 yearScope of delivery:1x ShineLan Box1x ShineRF Stick-X1x network cable

The Growatt Shinewifi-S Wifi Stick is used to connect the hybrid inverter to the Internet. The Growatt Shinewifi-S Wifi Stick is compatible with the single-phase Growatt SPH and Growatt SPA TL3 BH inverter series.

The Growatt Shine WIFI X data logger is wirelessly integrated into the home network. It can be used to monitor all Growatt MIC / MIN / MOD and SPH TL UP devices online. The Shine Wifi X can temporarily store the recorded data for up to 30 days. It is installed on the USB port of the respective Growatt inverter. The maximum wireless range depends on the local conditions and, according to the manufacturer, is max. 50m without obstacles. The inverter data is transferred to the Growatt Monitoring Cloud, which can be used free of charge. The system data is visualized and stored there. The data can be retrieved using the Shinephone app or via the browser connection.

Voltima connection cable SunFolder to charge controller The solar cables are flexible two-core cables that are especially suitable for wiring solar systems inside and outside buildings. They are used to connect a solar module with A50 Anderson pole to a solar charge controller. The cables are extremely robust, mechanically highly resilient and have very good weather resistance. These properties guarantee a long service life The cable is supplied as a connection cable with pre-installed Anderson connectors. The Anderson plugs are professionally pre-assembled using special tools and enable easy and smooth handling during installation and commissioning. Anderson plugs professionally pre-assembled2-wireWeatherproofDouble insulated

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS